Windows, macOS, Linux · HTTP and SOCKS5 · 6 steps
KikiLogin Proxy Setup: One Line per Profile in the Proxy Popup
KikiLogin takes the proxy as one line in the IP:Port:User:Password order, which is the host:port:user:pass format the QuanticData dashboard exports. Open Cài đặt proxy (proxy settings) while creating the profile, pick HTTP or SOCKS5, paste the line, press Kiểm tra (Check) and save. One sticky line per profile keeps every account on its own IP.
Set up the proxy in KikiLogin
Generate the line, open KikiLogin, follow the 6 moves below and finish with the tool's own check. The ports are in the table further down.
-
01
Generate the lines in host:port:user:pass
In the QuanticData dashboard open your plan and generate one line per profile in the host:port:user:pass format, HTTP or SOCKS5. On Residential Premium and Mobile turn on Sticky session and set the TTL, up to 24 hours. An ISP plan already lists each dedicated IP as IP:Port:Username:Password.
-
02
Start a new profile
In the left menu of KikiLogin click Tạo profile (Create profile). The editor has three columns: basic settings such as name, system and resolution; group, user agent, language and timezone; and the advanced settings.
-
03
Open the proxy settings
Click Cài đặt proxy (Proxy settings). A popup opens. Choose the type that matches the port of your line: HTTP for the HTTP port, SOCKS5 for the SOCKS5 port.
-
04
Paste the line into the Proxy field
Paste the whole line into the Proxy field, for example
residentialpremium.quanticdata.io:8080:USER-country-us-sid-p01-ttl-30m:PASS.The four parts must be in that order and separated by colons, with no spaces and no http:// prefix. -
05
Press Kiểm tra
A Kiểm tra (Check) button appears under the line once it is entered. Press it: KikiLogin tests the proxy and shows its parameters. The check runs only in the desktop app, not in the web version of KikiLogin.
-
06
Create and start the profile
Set the language and timezone to match the proxy country, then click Tạo profile mới (Create new profile) at the bottom right. Press Bắt đầu (Start) on the profile: KikiLogin checks the proxy again before the browser opens, so a profile with a proxy takes a little longer to start.
Check it
Kiểm tra in the proxy popup tests the line and shows its parameters. On an existing profile, click the flag icon (proxy set) or the globe icon (no proxy) in its row to open the same popup.
Start the profile and open a page that shows your IP: it should be the country of the line, and the IP that WebRTC reports should be the proxy IP, not yours.
Which QuanticData proxy suits KikiLogin profiles
KikiLogin is built around one profile per account and recommends one proxy per profile. The right network depends on the platform the profile logs into and how often it is opened.
| Profile is used for | Network | Why | Price |
|---|---|---|---|
| Facebook, TikTok and ad accounts | Mobile, sticky | Carrier IPs, one session per profile held up to 24 hours | $5 for 1 GB, valid 90 days |
| Shop and marketplace accounts | ISP (dedicated IP) | Already in IP:Port:User:Password form, the IP never changes | from $2.50 per IP for 30 days, unlimited traffic |
| Profiles in many countries | Residential Premium, sticky | Home IPs by country, state or city, a session id per profile | $4 for 1 GB, valid 30 days |
Prices in USD from the plan catalogue on Nov 16, 2026; card and PayPal add 22% VAT, the balance and crypto add none. Every pack is on the volume pricing page and every ISP country on the ISP page.
The KikiLogin labels in English
The official KikiLogin guides are written for the Vietnamese interface. These are the labels this setup touches and what they mean, so the steps can be followed in either language.
| Label in the official guide | Meaning | Where |
|---|---|---|
| Tạo profile | Create profile | Left menu |
| Cài đặt proxy | Proxy settings | Profile editor |
| Kiểm tra | Check | Proxy popup, under the line |
| Tạo profile mới | Create new profile (save) | Bottom right of the editor |
| Bắt đầu | Start | Profile row |
| Chỉnh sửa profile | Edit profile | Three-dot menu of a profile |
Cloned profiles share the proxy
KikiLogin copies the proxy when you duplicate a profile: the copy keeps every setting of the original, including the same line, so two profiles end up on one IP. After cloning, open the proxy popup of the copy and paste a new line with a different session id.
The same rule applies to new profiles: give each one its own sid. A sticky session that reaches its TTL keeps the same username and simply leaves from a new IP, which KikiLogin will not flag. For accounts opened every day, use the 24-hour session or a dedicated ISP IP.
Common KikiLogin proxy errors and the fix
What goes wrong most often when a QuanticData line goes into KikiLogin, and what to change.
| What you see | Cause and fix |
|---|---|
| Cannot connect to the proxy when the profile starts | The plan has expired or has no traffic left, or the line is in the wrong order. KikiLogin expects IP:Port:User:Password; renew the plan or copy the host:port:user:pass line again. |
| Kiểm tra fails right after the paste | HTTP was chosen with the SOCKS5 port, or the reverse. Pick the type that matches the port column of your plan. |
| No Kiểm tra button | You are in the web version of KikiLogin. The proxy check runs only in the desktop app. |
| Two accounts show the same IP | One profile is a clone of the other and kept its line. Paste a new line with a different session id into the copy. |
| The proxy works on and off | The session TTL is short, so the IP moves during the day. Generate lines with a longer TTL, up to 24 hours, or use an ISP IP. |
What to type: ports and the username
Copy the line from the dashboard (Proxies, your plan, the generator) rather than typing it: it already carries the host, the country, the session id and the session length. The table shows what each field holds.
| Plan | Copy it from | HTTP port | SOCKS5 port | Username shape |
|---|---|---|---|---|
| Residential Premium | the generator | 8080 | 1080 | USER-country-us-sid-k3f9a1b2-ttl-30m |
| Mobile | the generator | 8080 | 1080 | USER-country-us-type-mobile-sid-a1b2c3-ttl-30m |
| Residential Basic | the generator | in the line | in the line | USER-country-us plus a session for sticky |
| Datacenter (per GB) | the generator | 9999 | 10000 | the line's username |
| IPv6 | the generator | 1001 | in the line | the line's username |
| ISP (dedicated IP) | the plan page, one line per IP | in the line | in the line | the line's own login |
The host and the password are in the same line. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. On Premium ISP city plans one port serves both types. USER and the session id stand for your own values.
Where the line comes from in the dashboard
Step 3: the number of IPs, the price for 30 days and the Buy button. One IP is one antidetect profile.
After payment the plan is in My proxies: each IP comes as IP:Port:Username:Password, HTTP or SOCKS5, ready to paste into the tool.
The plan page has the generator: country, pool, Sticky session with its TTL, HTTP or SOCKS5, then one line per profile in host:port:user:pass.
The whole buying flow and both routes are on the integrations page.
KikiLogin proxy questions
What customers ask when they put a QuanticData line into KikiLogin.
Something else? Ask usWhich proxy format does KikiLogin use?
One line with four parts separated by colons: IP:Port:User:Password. The QuanticData generator exports it as host:port:user:pass, and ISP plans list each IP as IP:Port:Username:Password, so the line pastes as it is.
Does KikiLogin support SOCKS5?
Yes. The proxy popup takes HTTP and SOCKS5, and the official guide also lists HTTPS. Choose SOCKS5 with the SOCKS5 port of your plan or HTTP with the HTTP port; the host and login are the same.
Can several KikiLogin profiles use one proxy?
They can run, but KikiLogin recommends one proxy per profile because profiles sharing an IP are easier for platforms to link. Generate one sticky line per profile; each has its own session id.
Why does a cloned KikiLogin profile have the same IP?
Cloning copies the proxy with the rest of the profile, so both profiles use the same line. Give the copy a new line with a different session id from the generator.
Set up KikiLogin in five minutes
Create an account, buy one ISP IP or a gigabyte pack, copy one line per profile and paste it into KikiLogin. ISP from $2.50 per IP for 30 days, mobile from $5 for 1 GB.
Balance, crypto, card or PayPal · no VAT from the balance or crypto