Windows, macOS, Linux · HTTP and SOCKS5 · 6 steps
Identory Proxy Setup: Quick Proxy Insertion or Host and Port
In IDENTORY the proxy lives in the profile settings. Paste a QuanticData line into Quick Proxy Insertion in the http://user:pass@host:port form, or set Connection type to HTTP(S) proxy and fill Host, Port, Username and Password. Press Check proxy, keep the timezone auto-fill on, and give every profile its own sticky line.
Set up the proxy in Identory
Generate the line, open Identory, follow the 6 moves below and finish with the tool's own check. The ports are in the table further down.
-
01
Generate one sticky line per profile
In the QuanticData dashboard open your Residential Premium, Mobile or ISP plan. On a gigabyte plan pick the country, set Sticky session with a TTL of up to 24 hours, choose HTTP and the http://user:pass@host:port format, and generate as many lines as you have profiles. An ISP plan lists one line per dedicated IP.
-
02
Open the profile settings
Create a new profile in IDENTORY or open the settings of an existing one. The Main section holds Name, Group, Platform and Chrome version, then the two places a proxy can go: the Quick Proxy Insertion field and the Proxy block.
-
03
Paste the line into Quick Proxy Insertion
Leave the type on Auto and paste the whole line,
http://USER-country-us-sid-p01-ttl-30m:[email protected]:8080.IDENTORY splits it into Host, Port, Username and Password. For SOCKS5 generate the socks5:// form and its own port instead of editing the prefix by hand. -
04
Or fill the Proxy block by hand
Set Connection type to HTTP(S) proxy for the HTTP port or SOCKS4/5 proxy for the SOCKS5 port. Type the gateway in Host, the port in Port, and the username and password of the line in Username and Password. Proxy over SSH and TOR proxy are not used with these lines.
-
05
Press Check proxy
Check proxy, the last item of the Proxy block after Password, tests the line from the app before the profile starts. When it fails, the cause is almost always the type and port pair or a typo in the username.
-
06
Keep the location fields on auto-fill and start
Leave "Auto-fill Timezone, Languages and Geolocation before startup (based on external IP)" switched on and keep WebRTC enabled with Auto-detect IP. Save the profile and start it: on the first launch IDENTORY reads the exit IP and fills the timezone, languages and geolocation from it.
Check it
Check proxy in the Proxy block. The first launch then writes the timezone, languages and geolocation of the exit IP into the profile.
Open a page that shows your IP inside the profile: it should be the country of the line, and the timezone the page reports should match it.
Which QuanticData proxy suits IDENTORY profiles
IDENTORY builds a separate fingerprint for each profile, so the proxy only has to give each profile its own address that stays put. Choose by what the profile logs into, not by price per gigabyte alone.
| Profile is used for | Network | Why | Price |
|---|---|---|---|
| Social and ad accounts | Mobile, sticky | Carrier IPs, one sticky session per profile for up to 24 hours | $5 for 1 GB, valid 90 days |
| Store and marketplace accounts opened daily | ISP (dedicated IP) | The same static IP at every launch, unlimited traffic | from $2.50 per IP for 30 days, unlimited traffic |
| Many light profiles in several countries | Residential Premium, sticky | Home IPs by country, state or city, a session id per profile | $4 for 1 GB, valid 30 days |
Prices in USD from the plan catalogue on Nov 16, 2026; card and PayPal add 22% VAT, the balance and crypto add none. Every pack is on the volume pricing page and every ISP country on the ISP page.
Why the first launch matters in IDENTORY
The auto-fill option runs once. On the first start IDENTORY asks for the external IP, writes its timezone, languages and geolocation into the profile and then switches the checkbox off, so later launches keep those values without a new request.
With a sticky QuanticData line that is what you want: the country of the session id is fixed, so the stored timezone stays right. If you later swap the line for one in another country, switch the auto-fill checkbox back on before the next start, or the profile will report the old timezone with the new IP.
One profile, one session id
Give each profile a line with its own sid value. Two profiles that share a sid share one exit IP, and IDENTORY cannot tell them apart on the network side.
The Proxy list tool can import a whole batch of lines, check them in bulk and keep them in groups; a profile can then be told to take a live proxy from a group at launch. That suits scraping profiles. For an account you sign into, select one saved line in the profile instead, so it does not land on a different IP the next day.
When a sticky session ends, the same username simply leaves from a new IP; nothing errors. For accounts, generate the lines with the longest TTL, 24 hours, or use an ISP IP, which never changes during the plan.
Common Identory proxy errors and the fix
What goes wrong most often when a QuanticData line goes into Identory, and what to change.
| What you see | Cause and fix |
|---|---|
| Check proxy fails with every value right | HTTP(S) proxy was chosen with the SOCKS5 port, or the other way round. Match Connection type to the port column of your plan. |
| Quick Proxy Insertion fills the wrong fields | The line was pasted as host:port:user:pass. IDENTORY reads username:password:host:port in that order, so use the http:// or user:pass@host:port format from the generator. |
| Authentication error | A space or quote came with the paste, or the plan has expired or run out of traffic. Copy the line again from the generator and check the plan balance. |
| The IP changes from one day to the next | The TTL of the session ended, or the profile takes a proxy from a group. Use a 24-hour sticky line or an ISP IP selected in the profile itself. |
| Timezone does not match the IP | The line was replaced after the first launch. Turn the auto-fill checkbox back on and start the profile again. |
What to type: ports and the username
Copy the line from the dashboard (Proxies, your plan, the generator) rather than typing it: it already carries the host, the country, the session id and the session length. The table shows what each field holds.
| Plan | Copy it from | HTTP port | SOCKS5 port | Username shape |
|---|---|---|---|---|
| Residential Premium | the generator | 8080 | 1080 | USER-country-us-sid-k3f9a1b2-ttl-30m |
| Mobile | the generator | 8080 | 1080 | USER-country-us-type-mobile-sid-a1b2c3-ttl-30m |
| Residential Basic | the generator | in the line | in the line | USER-country-us plus a session for sticky |
| Datacenter (per GB) | the generator | 9999 | 10000 | the line's username |
| IPv6 | the generator | 1001 | in the line | the line's username |
| ISP (dedicated IP) | the plan page, one line per IP | in the line | in the line | the line's own login |
The host and the password are in the same line. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. On Premium ISP city plans one port serves both types. USER and the session id stand for your own values.
Where the line comes from in the dashboard
Step 3: the number of IPs, the price for 30 days and the Buy button. One IP is one antidetect profile.
After payment the plan is in My proxies: each IP comes as IP:Port:Username:Password, HTTP or SOCKS5, ready to paste into the tool.
The plan page has the generator: country, pool, Sticky session with its TTL, HTTP or SOCKS5, then one line per profile in host:port:user:pass.
The whole buying flow and both routes are on the integrations page.
Identory proxy questions
What customers ask when they put a QuanticData line into Identory.
Something else? Ask usWhere do proxies go in IDENTORY?
In each profile: the Quick Proxy Insertion field or the Proxy block of the profile settings. Large lists go into the Proxy list tool, which imports, checks and groups them for reuse. A QuanticData line goes in as a single paste or as host, port, username and password.
HTTP or SOCKS5 in IDENTORY?
Both work. Choose HTTP(S) proxy for the HTTP port of your plan or SOCKS4/5 proxy for the SOCKS5 port, with the same host and login. The type and the port must match, or Check proxy fails.
Which line format does Quick Proxy Insertion accept?
In Auto mode it reads protocol://username:password@host:port, which the QuanticData generator prints as the http:// or socks5:// format. With a type selected it also takes username:password@host:port and username:password:host:port.
How do I keep the same IP in an IDENTORY profile?
Use a sticky line with its own session id and a TTL of up to 24 hours, or a dedicated ISP IP, which stays the same for the whole plan. Select that one line in the profile rather than a group of proxies.
Set up Identory in five minutes
Create an account, buy one ISP IP or a gigabyte pack, copy one line per profile and paste it into Identory. ISP from $2.50 per IP for 30 days, mobile from $5 for 1 GB.
Balance, crypto, card or PayPal · no VAT from the balance or crypto