Documentation Python quickstart Blog Free tools Enterprise solutions hello@quanticdata.ioLog in

Windows 10, Windows 11 · HTTP · 5 steps

Windows Proxy Settings: Use a Residential Proxy on Windows 10 and 11

To use a proxy on Windows, open Settings, go to Network & internet, then Proxy, and next to Use a proxy server under Manual proxy setup select Set up. Turn the switch on, enter the QuanticData host in Proxy IP address and 8080 in Port, and Save. Windows has no username field: the browser asks for the login on the first page.

Set up the proxy in Windows

Open Windows, follow the 5 moves below and finish with the tool's own check. The values are in the table after the steps.

  1. 01

    Generate an HTTP line in the dashboard

    In the QuanticData dashboard open your residential or mobile plan, choose the country and a sticky session, and copy one line in host:port:user:pass format. On Residential Premium and Mobile the HTTP port is 8080. Keep the username and password at hand: Windows will not store them, the browser will ask.

  2. 02

    Open the Edit proxy server dialog

    Open Settings with Windows key + I and select Network & internet, then Proxy. Under Manual proxy setup, next to Use a proxy server, select Set up. On Windows 10 the same switch, address and port sit directly on the Proxy page.

  3. 03

    Enter the host and port, then Save

    Turn on Use a proxy server. Type residentialpremium.quanticdata.io in Proxy IP address and 8080 in Port. Leave Don't use the proxy server for local (intranet) addresses checked, add any sites that must skip the proxy to the exception list separated by semicolons, and select Save.

    Illustration of the Windows Edit proxy server dialog: Use a proxy server turned on, the QuanticData host residentialpremium.quanticdata.io in Proxy IP address, 8080 in Port, local addresses excluded, and the browser sign-in that asks for the QuanticData username and password on the first page
    Illustration of the Windows Edit proxy server dialog: Use a proxy server turned on, the QuanticData host residentialpremium.quanticdata.io in Proxy IP address, 8080 in Port, local addresses excluded, and the browser sign-in that asks for the QuanticData username and password on the first page.
  4. 04

    Sign in once in the browser and check the IP

    Open Edge or Chrome and load any page. The browser shows a sign-in box for the proxy: paste the username from the line, with its country and session, and the password. Then open the QuanticData proxy location checker in the same browser: it should show the country you chose, not your own.

  5. 05

    Optional: copy the setting to Windows services

    Windows services and some command-line tools read a second setting, WinHTTP. In a terminal opened as administrator, run netsh winhttp import proxy source=ie to copy the proxy you just saved; netsh winhttp show proxy prints it. Use this only with a whitelisted line: WinHTTP cannot ask for a login.

    Illustration of a Windows terminal opened as administrator with the three netsh winhttp commands: import proxy source=ie copies the Settings proxy into WinHTTP, show proxy prints it and reset proxy removes it, next to a card that separates the Settings app proxy from the WinHTTP proxy
    Illustration of a Windows terminal opened as administrator with the three netsh winhttp commands: import proxy source=ie copies the Settings proxy into WinHTTP, show proxy prints it and reset proxy removes it, next to a card that separates the Settings app proxy from the WinHTTP proxy.

Check it

The proxy location checker in the browser shows the exit IP and the country of the line. If it still shows your own IP, the app you are testing ignores the Windows setting.

Edge, Chrome and most programs that follow the Windows setting now send their traffic through the line. Firefox has its own proxy settings, and some programs ignore the system proxy: for those, see the last section.

Windows proxy with a username and password

The Windows proxy settings take only a host and a port. When the proxy asks for a login, each program asks you in its own way: Edge and Chrome show a sign-in box on the first page and keep the answer until they close. Programs that cannot show a prompt fail instead, usually with a 407 error.

Two ways avoid the prompt. On Residential Basic, Datacenter, ISP, IPv6 and Mobile V2 plans you can whitelist your public IP on the plan, in the dashboard or with the whitelist endpoint of the API; the gateway then accepts requests from that IP without a login, and Windows needs only the host and port of the whitelisted line. Residential Premium and Premium ISP log in with the username and password only. The other way is a proxy client that stores the login for the whole computer, such as Proxifier or v2rayN.

SOCKS5 on Windows

The Settings app sets an HTTP proxy only. For a SOCKS5 line, on port 1080 with the same host and login, use a client that speaks SOCKS5 and turns it into a system proxy: v2rayN and NekoBox route Windows through a SOCKS or HTTP node, and Proxifier sends chosen programs through it, all with the username and password stored.

Windows services and scripts: netsh winhttp

Windows keeps a second proxy setting, WinHTTP, used by Windows services and some command-line tools. It does not follow the Settings app by itself. In a terminal opened as administrator, netsh winhttp import proxy source=ie copies the Settings proxy into WinHTTP, netsh winhttp show proxy prints the current value and netsh winhttp reset proxy removes it. WinHTTP has no username field either, so it suits whitelisted lines.

netsh winhttp import proxy source=ie
netsh winhttp show proxy
netsh winhttp reset proxy

Windows proxy not working: what to check

  • Pages do not load at all: the host or the port is wrong, or Use a proxy server is on with an old address. Turn it off, check the line in the dashboard, and enter it again.
  • The browser keeps asking for the login: the username or password was typed with a space or without the country and session part. Paste the username exactly as the generator printed it.
  • A program shows error 407: it cannot ask for a login. Whitelist your IP on a plan that supports it, or route that program through Proxifier.
  • The checker shows your own IP: the program ignores the Windows setting. Firefox uses its own settings unless it is set to use the system proxy.
  • Still failing: log in and ask Quantic AI in the dashboard. It tests your line from our side with your own login and tells you what the gateway answered.

What to type: ports and the username

Copy the line from the dashboard (Proxies, your plan, the generator) rather than typing it: it already carries the host, the country, the session id and the session length. The table shows what each field holds.

PlanCopy it fromHTTP portSOCKS5 portUsername shape
Residential Premiumthe generator80801080USER-country-us-sid-k3f9a1b2-ttl-30m
Mobilethe generator80801080USER-country-us-type-mobile-sid-a1b2c3-ttl-30m
Residential Basicthe generatorin the linein the lineUSER-country-us plus a session for sticky
Datacenter (per GB)the generator999910000the line's username
IPv6the generator1001in the linethe line's username
ISP (dedicated IP)the plan page, one line per IPin the linein the linethe line's own login

The host and the password are in the same line. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. On Premium ISP city plans one port serves both types. USER and the session id stand for your own values.

Where the line comes from in the dashboard

  • QuanticData Premium ISP plan step: number of IPs 1 selected, $4.99 for 30 days and the Buy 1 IP button
    Step 3: the number of IPs, the price for 30 days and the Buy button. One IP is one antidetect profile.
  • QuanticData ISP plan page with the assigned IP, port, username and masked password, the protocol switch HTTP or SOCKS5 and the formatted output line
    After payment the plan is in My proxies: each IP comes as IP:Port:Username:Password, HTTP or SOCKS5, ready to paste into the tool.
  • QuanticData residential plan generator with country United States, Max pool, Sticky session of 30 minutes, HTTP, 10 sessions and the host:port:user:pass output format
    The plan page has the generator: country, pool, Sticky session with its TTL, HTTP or SOCKS5, then one line per profile in host:port:user:pass.

The whole buying flow, both routes and the prices are on the integrations page.

Windows proxy questions

What customers ask when they put a QuanticData line into Windows.

Something else? Ask us

How do I set up a proxy on Windows 11?

Open Settings, then Network & internet, then Proxy. Next to Use a proxy server select Set up, turn it on, enter the proxy host in Proxy IP address and the port in Port, and select Save. The browser asks for the username and password on the first page.

How do I set a proxy with a username and password on Windows?

Windows has no login fields. Enter the host and port in Settings and type the username and password when Edge or Chrome asks. To avoid the prompt, whitelist your IP on a plan that supports it, or use a client such as Proxifier that stores the login.

Does the Windows proxy setting support SOCKS5?

The Settings app sets an HTTP proxy only. For SOCKS5, on port 1080 with the same QuanticData host and login, use a client such as v2rayN, NekoBox or Proxifier that speaks SOCKS5 and stores the username and password.

Does the Windows proxy apply to every app?

It applies to Edge, Chrome and most programs that follow the system setting. Firefox has its own settings, Windows services use the separate WinHTTP setting, and some programs ignore both; route those through Proxifier.

How do I turn off the proxy on Windows?

Open Settings, Network & internet, Proxy, select Set up next to Use a proxy server, turn the switch off and select Save. If you also copied it to WinHTTP, run netsh winhttp reset proxy in a terminal opened as administrator.

Put your Windows PC on a home IP

Create an account, take the free 100 MB residential trial, copy one HTTP line and enter its host and port in the Windows proxy settings.

Balance, crypto, card or PayPal · no VAT from the balance or crypto