Documentation Python quickstart Blog Free tools Enterprise solutions hello@quanticdata.ioLog in

Windows · HTTP and SOCKS5 · 4 steps

MarketerBrowser Proxy Setup: Add Proxy, Four Fields, Test

To add a proxy to MarketerBrowser, open Browser, click Create and then Add proxy. Choose the Proxy type, then fill Host, Port, Username and Password from the QuanticData line: they are four separate fields, so split host:port:user:pass at the colons. Click Test, then Save, and save the browser profile.

Set up the proxy in MarketerBrowser

Open MarketerBrowser, follow the 4 moves below and finish with the tool's own check. The values are in the table after the steps.

  1. 01

    Create a browser profile

    Open MarketerBrowser, choose the Browser section on the left of the screen and click Create at the top. The window of the new profile opens; give it a name you will recognise later.

  2. 02

    Click Add proxy

    In the profile window click Add proxy. The Add Proxy window opens with Proxy type, Host, Port, Username and Password, the Test button and Not use proxy, which leaves the profile on your own connection.

  3. 03

    Choose the Proxy type and split the line

    Set Proxy type to HTTP for port 8080 or SOCKS5 for port 1080 (SOCKS4 does not apply). From residentialpremium.quanticdata.io:8080:USER-country-us-sid-p01-ttl-60m:PASS type the host into Host, 8080 into Port, the long username into Username and the password into Password. The Host box keeps hosts you used before in its dropdown.

    Illustration of the MarketerBrowser Add Proxy window with the QuanticData gateway host in Host, port 8080 in Port, a sticky username with a session id in Username and PASS in Password, next to the generator line and the Test result
    The Add Proxy window of MarketerBrowser, drawn with its own field names and the four parts of a QuanticData line.
  4. 04

    Test, then Save

    Click Test. When the line answers, click Save to keep the proxy settings, then save the browser profile. The profile now opens through that line every time.

Check it

The Test button in the Add Proxy window checks the line before you save it. A failure with correct values almost always means the Proxy type and the Port do not match.

Open the profile and visit an IP lookup page inside it, or paste the exit IP into the QuanticData proxy location checker: the country must be the one in the username, and it must stay the same on the next launch while the session lasts.

Which QuanticData proxy suits MarketerBrowser profiles

MarketerBrowser binds one proxy to each profile and keeps that profile's cookies apart. The proxy that never changes is a dedicated ISP IP: $4.99 for one Premium ISP IP for 30 days, unlimited traffic. Its line comes from the plan page as IP:Port:Username:Password and goes into the same four fields.

For social accounts, a mobile line matches the phone that MarketerBrowser's built-in Android emulator presents: $5 for 1 GB, valid 90 days. For e-commerce and ad checks in a given country, Residential Premium starts at $4 for 1 GB for 30 days. Both are priced by the gigabyte, so one pack serves several profiles that browse lightly.

One sticky username per MarketerBrowser profile

With four separate fields, the only part that changes from profile to profile is Username. Host, Port and Password stay the same; the username carries the country, the session id (sid) and the session length (ttl, up to 24 hours with the generator's Super sticky option):

Profile 01  Username: USER-country-us-sid-p01-ttl-60m
Profile 02  Username: USER-country-us-sid-p02-ttl-60m
Profile 03  Username: USER-country-ca-sid-p03-ttl-60m
All three   Host: residentialpremium.quanticdata.io  Port: 8080  Password: PASS

Copy each line from the generator rather than editing the sid by hand, so the session id is one the gateway issued. When a session ends the profile gets a new IP on the next connection; generate a new line for that profile instead of borrowing another profile's username.

Common MarketerBrowser proxy problems

  • Test fails with the right login: HTTP is selected with port 1080, or SOCKS5 with 8080. Match the Proxy type to the port.
  • The whole line was pasted into Host: Host takes the host only. Split host:port:user:pass at the colons into the four fields.
  • Test passes but the profile opens on your own IP: the profile was not saved after the proxy, or Not use proxy is set. Open the profile, add the proxy again and save both windows.
  • An old host comes back: the Host box offers earlier entries in its dropdown. Check that the selected host is the QuanticData gateway of the current plan.
  • The country changes between launches: the session in the username expired or two profiles share one sid. Generate a new sticky line for each profile.

What to type: ports and the username

Copy the line from the dashboard (Proxies, your plan, the generator) rather than typing it: it already carries the host, the country, the session id and the session length. The table shows what each field holds.

PlanCopy it fromHTTP portSOCKS5 portUsername shape
Residential Premiumthe generator80801080USER-country-us-sid-k3f9a1b2-ttl-30m
Mobilethe generator80801080USER-country-us-type-mobile-sid-a1b2c3-ttl-30m
Residential Basicthe generatorin the linein the lineUSER-country-us plus a session for sticky
Datacenter (per GB)the generator999910000the line's username
IPv6the generator1001in the linethe line's username
ISP (dedicated IP)the plan page, one line per IPin the linein the linethe line's own login

The host and the password are in the same line. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. On Premium ISP city plans one port serves both types. USER and the session id stand for your own values.

Where the line comes from in the dashboard

  • QuanticData Premium ISP plan step: number of IPs 1 selected, $4.99 for 30 days and the Buy 1 IP button
    Step 3: the number of IPs, the price for 30 days and the Buy button. One IP is one antidetect profile.
  • QuanticData ISP plan page with the assigned IP, port, username and masked password, the protocol switch HTTP or SOCKS5 and the formatted output line
    After payment the plan is in My proxies: each IP comes as IP:Port:Username:Password, HTTP or SOCKS5, ready to paste into the tool.
  • QuanticData residential plan generator with country United States, Max pool, Sticky session of 30 minutes, HTTP, 10 sessions and the host:port:user:pass output format
    The plan page has the generator: country, pool, Sticky session with its TTL, HTTP or SOCKS5, then one line per profile in host:port:user:pass.

The whole buying flow and both routes are on the integrations page.

MarketerBrowser proxy questions

What customers ask when they put a QuanticData line into MarketerBrowser.

Something else? Ask us

How do I set up a proxy in MarketerBrowser?

Choose Browser on the left, click Create, then Add proxy. Pick the Proxy type, fill Host, Port, Username and Password, click Test and then Save, and save the browser profile.

Which proxy types does MarketerBrowser support?

The Add Proxy window offers HTTP, SOCKS4 and SOCKS5. QuanticData lines work as HTTP on port 8080 or SOCKS5 on port 1080 with the same username and password.

Can I paste host:port:user:pass into MarketerBrowser?

Not into one box: the Add Proxy window has separate Host, Port, Username and Password fields. Split the line at the colons; the password is the part after the last colon.

Does MarketerBrowser run on macOS?

MarketerBrowser is published as a Windows application. On a Mac, run it in a Windows environment; the proxy values do not change.

Which QuanticData plan works best in MarketerBrowser?

One dedicated ISP IP per profile is the simplest: $4.99 for one Premium ISP IP for 30 days with unlimited traffic. For social accounts, a mobile line ($5 for 1 GB) with one sticky session per profile is the strongest.

Set up MarketerBrowser in five minutes

Create an account, buy one ISP IP or a gigabyte pack, copy the line and paste it into the fields above. One Premium ISP IP is $4.99 for 30 days; mobile is $5 for 1 GB and Residential Premium $4 for 1 GB.

Balance, crypto, card or PayPal · no VAT from the balance or crypto