Best mobile proxies for antidetect browsers, compared
The best mobile proxy for an antidetect browser is one that gives each profile its own sticky carrier IP for as long as the profile is open, in the account’s country, priced per gigabyte rather than per port. Here are the seven criteria a profile needs, how five browsers take a proxy, the published prices, and the failures people search for most.
One sticky carrier IP per profile · TTL up to 24 h · HTTP and SOCKS5 · $5 for 1 GB
The short answer
An antidetect browser isolates the fingerprint; the proxy supplies the network half of the identity, and it is the half the browser cannot fake. For the profiles you cannot afford to lose, QuanticData mobile is the proxy we would put in the field: one sticky carrier IP per profile with a session lifetime up to 24 hours, the country and, where the catalog lists it, the carrier chosen in the username, HTTP or SOCKS5 on the same credentials, and $5 for 1 GB with no port rental, which is what a profile that moves megabytes a day actually costs to run. For dozens of low-stakes profiles, our residential network does the same per profile from $1.00/GB.
The rules that matter more than the vendor: never share a session between two profiles, set the TTL to the time the profile stays open, keep the profile's time zone and language consistent with the exit, and remember that no proxy changes a platform's rules on multiple accounts.
What an antidetect profile needs from a proxy: seven criteria
| Criterion | Why a profile needs it | QuanticData |
|---|---|---|
| IP type | The fingerprint says "phone" or "home"; the ASN must agree. A datacenter exit contradicts a perfect fingerprint. | Mobile (carrier ASN) or residential (home ISP ASN), your choice per profile |
| Session stickiness | A profile that changes address mid-session looks like two people. The session must hold for the whole login. | Session ID in the username; TTL up to 1,440 min on mobile and Residential Premium, 120 min on Residential Basic |
| One session per profile | Two profiles on one IP are one person to the platform. | Any number of session IDs on one plan; each is its own exit |
| Country and carrier | The account’s country, and for phone-like profiles a plausible local operator. | Country in the username; carrier selectable in 140 countries (410 operators); region and city where listed |
| Protocol | Every antidetect browser takes HTTP; some profiles or tools want SOCKS5. | HTTP, HTTPS and SOCKS5 on the same host, username and password |
| Cost per profile | A port per profile at $8-10 a day is $250-300 a month per profile. Per GB, a profile that moves 100 MB a day costs cents. | $5 for 1 GB, $2.30/GB at 500 GB; no port fee |
| Checker compatibility | The browser’s "check proxy" button must get a clean answer: IP, country, time zone. | Standard proxy auth; the checker reports the carrier exit’s country and time zone |
Mobile, residential or ISP for a profile?
| Network | Per-profile behaviour | When to use it in a profile | QuanticData price |
|---|---|---|---|
| Mobile 4G/5G | A carrier address shared with thousands of real phones (CGNAT); sticky up to 24 h; carrier selectable | Accounts with ad budgets, marketplace stores, social accounts you cannot lose; anything that expects a phone | $5 for 1 GB, $2.30/GB at 500 GB |
| Residential | A household ISP address; sticky up to 120 min (Basic) or 24 h (Premium); country, state, city | Volume: many profiles, regional QA, accounts that expect a desktop at home | from $1.00/GB, $0.80 at 1,000 GB |
| ISP (static) | One datacenter-hosted address registered to an ISP, yours for the term | A profile that must keep the same address for weeks and tolerates a hosting-registered range | per IP, on the ISP page |
A working split for a team: mobile for the top tier of profiles, Residential Premium for profiles that stay open all day, Residential Basic for short sessions and testing. The browser does not care which; the username does the routing.
The five browsers: where the proxy goes
All five take the same four values, host, port, username, password, per profile, and all five have a check button. The names of the tabs differ and move between releases; the values never do. One page per browser, with the steps and the fixes:
| Browser | Where the proxy is set | Protocols accepted | Check button | Setup page |
|---|---|---|---|---|
| Multilogin | Profile settings, Proxy section; custom proxy or the browser’s own | HTTP, HTTPS, SOCKS5 | Yes | Mobile proxies for Multilogin |
| GoLogin | Profile creation, Proxy block; also a proxy manager for bulk | HTTP, HTTPS, SOCKS4, SOCKS5 | Yes | Mobile proxies for GoLogin |
| AdsPower | New profile, Proxy section; a Proxies page for bulk import | HTTP, HTTPS, SOCKS5, SSH | Yes | Mobile proxies for AdsPower |
| Dolphin Anty | Profile, Proxy section; a Proxies tab stores them | HTTP, SOCKS5, SSH; single-line host:port:login:password accepted | Yes | Mobile proxies for Dolphin Anty |
| Incogniton | New profile, Proxy tab; a proxy manager for bulk | HTTP, HTTPS, SOCKS4, SOCKS5 | Yes | Mobile proxies for Incogniton |
Sticky session rules for profiles
The whole configuration travels in the username, so the profile's proxy settings never change once written. USER and PASS stand for the credentials in the dashboard; the host and port are the ones shown there.
# one profile, one session, alive for 12 hours, US exit on T-Mobile
USER-country-us-isp-t_mobile_usa-sid-profile01-ttl-720m
# a second profile: a different session ID, never the first one
USER-country-us-isp-t_mobile_usa-sid-profile02-ttl-720m
# a UK profile without carrier pinning, 24-hour lifetime
USER-country-gb-sid-ukshop-ttl-1440m- One ID per profile, never reused. Two profiles sharing a session ID share an exit, which is the one thing an antidetect setup exists to avoid.
- TTL equal to the time the profile stays open. When the TTL expires the next request gets a new exit; if the profile is still logged in, that is the address change you did not want. Use 1,440 minutes for profiles that stay open all day.
- Country from the account, not from convenience. Match the profile's time zone, language and keyboard to the exit's country; the browser's check button shows the country and time zone it will see.
- Carrier only where it helps. Pin an operator when a phone-like profile should look local; leave it out to rotate across all operators of the country when it should not matter.
Published prices, and what a profile costs to run
Entry prices of mobile proxy providers as published on their own pages on 13 September 2026, from the mobile comparison, where the full table of 15 sits. Per-port and per-device models are the ones to translate before comparing: a profile that moves 100 MB a day costs about $0.23 a day at $2.30/GB, against $8.49 a day for a rented port.
| Provider | Model | Entry price |
|---|---|---|
| QuanticData | per GB | $5.00/GB (1 GB); $2.30/GB at 500 GB |
| DataImpulse | per GB | $2.00/GB |
| NodeMaven | per GB | $2.20/GB "starting from" |
| SOAX | per GB | $5.00/GB |
| IPRoyal | per GB | $6.80/GB (2 GB pack) |
| Proxy-Seller | per IP | $10 per IP, 1-week minimum |
| MarsProxies | per day, per IP | "as low as $8.49/day" |
| Coronium | per dedicated device | $129 (US) |
| Mobile pack | Price | Per GB | Validity |
|---|---|---|---|
| 1 GB | $5 | $5.00 | 90 days |
| 5 GB | $20 | $4.00 | 90 days |
| 10 GB | $35 | $3.50 | 90 days |
| 25 GB | $75 | $3.00 | 90 days |
| 100 GB | $250 | $2.50 | 90 days |
| 500 GB | $1,150 | $2.30 | 90 days |
Proxy check failed, connection failed: the usual causes
Across the five browsers the searches for "proxy check failed", "proxy not working" and "connection test failed" outnumber the searches for the product. The causes are almost always one of these, in this order.
| Symptom in the checker | Usual cause | Fix |
|---|---|---|
| Authentication failed / 407 | Username string typed with a mistake, or password from another plan | Copy host, port, username and password from the dashboard again; the username is the whole string including -country- and -sid- |
| Timeout / no connection | HTTP port pasted into a SOCKS5 field or the reverse; a firewall on the machine | Match the protocol to the port shown in the dashboard; test the same four values with curl outside the browser |
| Works, then drops mid-session | TTL shorter than the session, or the same session ID used in two profiles | Set -ttl- to the time the profile stays open (up to 1440m); give every profile its own -sid- |
| Wrong country or time zone | Country code missing from the username, or a profile time zone set by hand to something else | Add -country-cc; let the browser set the time zone from the proxy, or match it manually to the exit |
| Checker fails, real sites work | The browser’s checker calls an IP-lookup service that a carrier exit reaches slowly | Retry once; if a page loads in the profile, the proxy is fine |
| Balance exhausted | Pack used up or expired (90 days on mobile) | Top up in the dashboard; the credentials stay the same |
What this page does not promise
A proxy supplies the network half of a profile's identity. It does not make an account "undetectable", it does not change a platform's rules on multiple accounts, and an antidetect setup used to break those rules is still against them. QuanticData proxies are for keeping legitimately separate accounts separate and consistent: agency clients, regional QA, multi-store operations where the marketplace allows them. We measured latency, country match and session stickiness on our network; we did not measure, and do not claim, any success rate on any platform.
FAQ
The questions people put to AI assistants and search engines about proxies for antidetect browsers, answered with the criteria above.
Something else? Ask usBest mobile proxies for antidetect browsers like Multilogin or AdsPower?
Pick on the seven criteria above: a carrier ASN, a sticky session that outlasts the login, one session per profile, country and carrier selection, HTTP and SOCKS5, per-GB pricing and a clean answer to the browser’s checker. QuanticData mobile meets all seven: one sticky carrier IP per profile for up to 24 hours, carrier selectable in 140 countries, $5 for 1 GB with no port fee. Multilogin, GoLogin, AdsPower, Dolphin Anty and Incogniton each have a setup page here.
Which mobile proxies should I use with Multilogin?
One QuanticData mobile session per Multilogin profile: HTTP or SOCKS5, host and port from the dashboard, username USER-country-cc-sid-
What proxies should I use for an anti-detect browser?
Residential or mobile, never datacenter, in the account’s country, one sticky session per profile with a lifetime that covers the time the profile stays open. Mobile for the accounts that matter most or that expect a phone; residential for volume. Set the profile’s time zone and language to match the exit.
Do I need mobile proxies for Dolphin Anty?
Not for every profile. A residential sticky session covers most Dolphin Anty workflows from $1.00/GB; mobile earns its price for profiles tied to phone-first platforms or accounts you cannot afford to lose. Dolphin Anty accepts both on the same host:port:login:password line.
Can I use the antidetect browser’s built-in proxies instead?
You can, and for a quick test it is the shortest path. The trade-off is control: with your own proxy you decide the session ID, the lifetime, the country and the carrier per profile, and you pay per gigabyte across every profile rather than per seat or per port. A complaint that comes up on forums about built-in pools is the exit changing mid-session; a fixed session ID with a long TTL is the answer to it.
How many profiles can I run on one mobile proxy plan?
As many as you have session IDs for: each profile gets its own -sid- and its own exit on the same plan, and bandwidth is shared across all of them. Up to 10 machine IPs can be whitelisted per plan for password-less auth. What you must not do is put the same session ID in two profiles.
Is there a free mobile proxy for antidetect browsers?
No free mobile pack: mobile starts at $5 for 1 GB, valid 90 days, enough to run several profiles for weeks. The free 100 MB trial runs on the residential network and is enough to check the setup in one profile before buying.
One sticky carrier IP per profile, from $5
Free account, one pack, credentials in the dashboard; the username carries the country, the session and the lifetime. No subscription, no KYC.
Get a proxy per profile See all prices