Windows, macOS, Android, iOS · SOCKS5 and HTTP · 10 steps
Karing Proxy Setup: Add a SOCKS5 or HTTP Proxy with Username and Password
To add a proxy with a login in Karing, open Add Profile, choose Custom and name the profile. In My Profiles click + on it, pick socks or http, and fill server, server_port, username and password. Save with the check mark, pick the server in the bar at the bottom and Karing connects. Tested in Karing 1.2.26.2934 on Windows.
Set up the proxy in Karing
Open Karing, follow the 10 moves below and finish with the tool's own check. The values are in the table after the steps.
-
01
Open Add Profile and choose Custom
Accept the defaults of the first-start screens; Karing then opens Add Profile by itself; later you reach it from Add Profile on the home screen. Choose Custom at the bottom of the second group.
Karing Add Profile page on Windows with the Custom entry framed in red, under Add Profile Link, Import From Clipboard, Import Profile File and Scan QR Code. -
02
Name the profile
Karing asks for a name in a small Custom box. Type one you will recognise, for example QuanticData, and click Ok. The profile is created empty and Karing goes back to Add Profile; press the arrow at the top left to return home. A name that is already used gives the message Remark already exists, please use another name.
Karing Custom dialog with the profile name QuanticData typed in and the Ok button framed, over the Add Profile page. -
03
Open My Profiles and click +
On the home screen click My Profiles. The new profile shows as QuanticData[0], with an SB badge because Karing stores it in sing-box format, and a row of icons under it. Click + to add a server to it.
Karing My Profiles page with the empty QuanticData[0] profile and the plus icon framed, next to share, edit and the bolt icon of the latency test. -
04
Pick socks or http
The Add dialog opens with socks selected. Keep socks for the SOCKS5 port of your plan, or open the list and pick http for the HTTP port; the list also holds shadowsocks, vmess, vless, trojan, hysteria, wireguard and other protocols you do not need here. Click Ok.
Karing Add dialog with its protocol list open and the socks and http entries framed, among shadowsocks, vmess, vless, trojan, hysteria2 and wireguard. -
05
Fill the server fields and save
The Edit page uses sing-box field names. Type a name in tag (Residential-US in our test), the gateway host in server, the port in server_port, then username and password exactly as the generator printed them. Leave version empty: Karing then speaks SOCKS5, which is what the 1080 port expects. Leave network as it is and save with the check mark at the top right.
Karing Edit page for a socks server: tag Residential-US, server residentialpremium.quanticdata.io, server_port 1080, version empty, username and password framed with placeholders in place of the real login. -
06
Add a mobile line the same way
Click + again and pick http to add a mobile line on the HTTP port. The http form has server, server_port, username and password, then path, headers and tls, which stay empty and off for our gateways. In our test the tag was Mobile-US, the server mobile.quanticdata.io and the port 8080. Each saved server adds one to the count, QuanticData[2] after both.
Karing Edit page for an http server: tag Mobile-US, server mobile.quanticdata.io, server_port 8080, username and password framed with placeholders, path, headers and tls left empty. -
07
Run the latency test
Expand the profile with the arrow and click the bolt icon under it to run the latency test. Each server gets a latency in green when the gateway accepted the login: 217 ms for the residential SOCKS5 line and 243 ms for the mobile HTTP line from our test PC.
Karing My Profiles with QuanticData[2] expanded: Residential-US socks at 217 ms and Mobile-US http at 243 ms after the latency test. -
08
Select the server and connect
Go back home and click the bar at the bottom, which reads Auto Select on a new install. Select Server lists your servers under Recommend; click Residential-US. Karing connects at once, shows the server and its latency in the bar, switches System Proxy to on and starts counting traffic. The shield button in the middle disconnects, which also switches the system proxy off again.
Karing home screen connected: current profile QuanticData, System Proxy switched on, Rule mode, and Residential-US with 217 ms in the server bar at the bottom, both framed. -
09
Run Net Check
Click Net Check on the home screen, keep google.com in Domain and click Check. Under Proxy Server, Karing resolves the gateway host and ends with a green [Residential-US] connection succeeded, with the tag of your server in the brackets.
Karing Net Check results: network connectivity, rule sets and DNS in green, and under Proxy Server the line [Residential-US] connection succeeded framed, after the residentialpremium.quanticdata.io DNS query. -
10
Read the exit IP
Load an IP page through Karing, in a browser or with curl.exe -s -x http://127.0.0.1:3067 https://ipinfo.io/json. With Mobile-US selected the answer was a T-Mobile USA address (AS21928) in Connecticut; the address itself is hidden in our screenshot.
curl through the Karing local port 127.0.0.1:3067 with the Mobile-US server selected: ipinfo.io returns a T-Mobile USA IP in Bloomfield, Connecticut, framed.
Check it
Net Check on the home screen tests the route and ends with [Residential-US] connection succeeded under Proxy Server. Then load an IP page in a browser, or run curl.exe -s -x http://127.0.0.1:3067 https://ipinfo.io/json: 3067 is the local port Karing set as the Windows proxy in our test, and the answer must be the exit of your line, not your own IP.
In our test the residential line answered from a residential fibre address in Nebraska and the mobile line from T-Mobile USA in Connecticut, each the same exit for the whole sticky session. Karing 1.2.26.2934 on Windows is shown.
Karing and the Windows system proxy
Selecting a server connects Karing and turns on System Proxy: in our test the Windows proxy setting then read 127.0.0.1:3067, the local port where Karing hands traffic to the QuanticData line. Disconnecting with the shield button switched the Windows proxy off again. A program that does not follow the system setting can be pointed at 127.0.0.1:3067 by hand, as curl was in the check above.
The session holds as long as the ttl in the username. With the residential server selected, curl through Karing returned the same Nebraska address that sing-box and Hiddify returned for the same session id within the same half hour.
curl.exe -s -x http://127.0.0.1:3067 https://ipinfo.io/json
Which QuanticData line to put in Karing
Karing routes the whole computer, so the line you add becomes the address every site sees. The mobile and Residential Premium lines below were tested in Karing on 20 Nov 2026, Residential Basic in the sing-box core Karing runs.
- Mobile: a carrier IP, T-Mobile USA in our test, for apps and accounts that expect a phone network. Host mobile.quanticdata.io, HTTP 8080 or SOCKS5 1080, country and session in the username.
- Residential Premium: a home IP in the country you choose, with the session kept up to 24 hours. Host residentialpremium.quanticdata.io, HTTP 8080 or SOCKS5 1080.
- Residential Basic: home IPs with their own host and ports in the line, and IP whitelisting on the plan if you prefer not to store a login.
- ISP: one dedicated IP that never changes, for a computer that must keep the same address for weeks. The line comes from the plan page.
Karing proxy not working: what to check
- No latency after the latency test: check that the type and the port agree. socks goes with 1080, http with 8080 on Residential Premium and Mobile; in the sing-box core Karing runs, a mismatch fails with EOF or malformed HTTP response.
- The server connects but pages fail: the username or password was typed with a space, or without the country and session part. Paste the username exactly as the generator printed it.
- Some apps ignore the system proxy: point them at 127.0.0.1:3067 by hand.
- Still failing: log in and ask Quantic AI in the dashboard. It tests your line from our side with your own login and tells you what the gateway answered.
What to type: ports and the username
Copy the line from the dashboard (Proxies, your plan, the generator) rather than typing it: it already carries the host, the country, the session id and the session length. The table shows what each field holds.
| Plan | Copy it from | HTTP port | SOCKS5 port | Username shape |
|---|---|---|---|---|
| Residential Premium | the generator | 8080 | 1080 | USER-country-us-sid-k3f9a1b2-ttl-30m |
| Mobile | the generator | 8080 | 1080 | USER-country-us-type-mobile-sid-a1b2c3-ttl-30m |
| Residential Basic | the generator | in the line | in the line | USER-country-us plus a session for sticky |
| Datacenter (per GB) | the generator | 9999 | 10000 | the line's username |
| IPv6 | the generator | 1001 | in the line | the line's username |
| ISP (dedicated IP) | the plan page, one line per IP | in the line | in the line | the line's own login |
The host and the password are in the same line. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. On Premium ISP city plans one port serves both types. USER and the session id stand for your own values.
Where the line comes from in the dashboard
Residential and Mobile are bought by the gigabyte: Residential Premium from $4 for 1 GB down to $2.20 per GB at 500 GB.
Mobile: $5 for 1 GB, valid 90 days, down to $2.30 per GB at 500 GB.
The plan page has the generator: country, pool, Sticky session with its TTL, HTTP or SOCKS5, then one line per profile in host:port:user:pass.
The whole buying flow, both routes and the prices are on the integrations page.
Karing proxy questions
What customers ask when they put a QuanticData line into Karing.
Something else? Ask usHow do I add a proxy with a username and password in Karing?
Open Add Profile, choose Custom and name the profile. In My Profiles click + on it, pick socks or http and fill server, server_port, username and password. Save with the check mark, then select the server in the bar at the bottom of the home screen.
Does Karing support HTTP proxies?
Yes. The Add dialog lists http next to socks. We tested an http server on the QuanticData mobile gateway, port 8080: the latency test returned 243 ms and the exit was a T-Mobile USA address.
What goes in the version field of a Karing socks server?
Nothing. Left empty, Karing uses SOCKS5, which is what the QuanticData 1080 port expects. Our test connected with the field empty.
Which port does Karing use as the system proxy?
In our test on Windows Karing set 127.0.0.1:3067 as the system proxy when it connected, and removed it when we disconnected with the shield button. Any program can also be pointed at that address by hand.
Is Karing based on sing-box?
Karing says it runs a modified sing-box core, and it shows: a custom profile carries an SB badge and the server form uses sing-box field names such as server_port. The same line works in sing-box itself.
Put Karing on a home or mobile IP
Create an account, take the free 100 MB residential trial or a mobile pack, copy one sticky line and type it into a Karing socks or http server.
Balance, crypto, card or PayPal · no VAT from the balance or crypto