# IPv4 Residential Proxies: 16 Countries Tested

> IPv4 residential proxies, tested: 317 home exits in 16 countries, every one in the country asked, on 154 home networks. Basic from $0.80/GB, Premium $2.20/GB.

[Home](https://quanticdata.io/) / [Residential proxies](https://quanticdata.io/residential-proxies/) / IPv4 residential proxies

Residential · Tested on 20 November 2026

# IPv4 residential proxies: home IPv4 addresses, tested in 16 countries

An IPv4 residential proxy sends your requests from the IPv4 address of a home internet connection. We tested ours on 20 November 2026: 317 rotating exits on Residential Basic and Premium in 16 countries, every one in the country asked, on 154 home networks and none of them a hosting range. From $0.80 per GB.

[Buy residential proxies](https://app.quanticdata.io/register?next=%2Fplans%3Fnetwork%3DRESIDENTIAL&utm_source=ipv4-residential-proxies&utm_medium=ai-twin&utm_campaign=proxy-types&utm_content=ipv4-residential-proxies) · [See the test](https://quanticdata.io/ipv4-residential-proxies/#test)

![IPv4 residential proxies: the record a dual-stack website reads from one of our home exits, with four coloured zones, IP version IPv4, address owner a home internet provider, the country set in the username and no hosting range. The card shows our test of 20 November 2026 on Residential Basic and Premium: 317 home exits in 16 countries, each in the country asked, on 154 home networks, none of them a hosting range.](https://quanticdata.io/ipv4-residential-proxies/hero.webp?v=20261120v4r)

*IPv4 is the version of the address, residential is its owner: 317 home exits in 16 countries on 20 November 2026.*

IPv4 vs residential

## Two questions, not two kinds of proxy.

"IPv4 or residential?" mixes two separate questions. The first is the version of the internet protocol the address belongs to: IPv4, the 32-bit addresses every website accepts, or IPv6. The second is who owns the address: a home internet provider, a mobile carrier or a hosting company. A residential proxy answers the second question with "a home provider", and its address is almost always IPv4.

IP version and address owner: the two things a website can read from an exit

| Proxy | IP version | Who owns the address | At QuanticData |
| --- | --- | --- | --- |
| Residential | IPv4 | A home internet provider | Residential Basic and Premium, rotating or sticky, per GB |
| Mobile | IPv4 | A mobile carrier | [Mobile](https://quanticdata.io/mobile-proxies/), rotating or sticky, per GB |
| ISP (static) | IPv4 | Registered to an internet provider, one address for the term | [Static residential](https://quanticdata.io/static-residential-proxies/), per IP |
| Datacenter | IPv4 | A hosting company | [Datacenter](https://quanticdata.io/datacenter-proxies/), per GB |
| IPv6 | IPv6 | A hosting company | [IPv6](https://quanticdata.io/ipv6-proxies/), per GB |

So when a seller lists "IPv4 proxies" next to "residential proxies", the IPv4 product is usually a datacenter address, and the residential one is IPv4 too. A site that scores the type of an address looks at the owner, not at the version. Every network side by side, with prices, is on [IPv4 proxies](https://quanticdata.io/ipv4-proxies/); the owner question in depth is in [residential vs datacenter proxies](https://quanticdata.io/blog/residential-vs-datacenter-proxies/).

Our IPv4 test

## 317 home exits, 16 countries, two dual-stack endpoints.

On 20 November 2026 we sent 10 rotating requests per country through Residential Basic and 10 through Residential Premium, alternating two endpoints that accept both IPv4 and IPv6: the Cloudflare trace page and a dual-stack IP echo. Each one reports the address the request arrived from, so it shows the IP version the exit used. Both lines gave IPv4 exits in each of the 16 countries. We then looked up every address in the ip-api.com database for its country, its network and whether it is a hosting range.

Residential Basic and Premium, rotating lines, 10 requests per country each, 20 November 2026; home networks in the sample as reported by ip-api.com

| Country | Home networks in the sample |
| --- | --- |
| United States | Comcast, AT&T, Charter, Verizon, Cablevision |
| United Kingdom | BT, Sky, TalkTalk, Virgin Media, PlusNet |
| Germany | Deutsche Telekom, Vodafone, 1&1 Versatel, Telefonica Germany |
| France | Orange, Free, Bouygues Telecom, SFR |
| Italy | Telecom Italia, Vodafone, Fastweb, Wind Tre, Open Fiber |
| Spain | Telefonica de Espana, Digi, Avatel, Ono |
| Netherlands | KPN, Ziggo, Odido, Delta Fiber |
| Poland | P4, T-Mobile Polska, Netia, Vectra |
| Turkey | Turk Telekom, Superonline, Turksat |
| Brazil | Telefonica Brasil, Brisanet and regional providers |
| Mexico | Uninet, Totalplay, Megacable, Cablevision |
| Canada | Bell, Rogers, TELUS, Cogeco |
| India | Bharti Airtel, BSNL, Reliance Jio, Tata Play |
| Japan | NTT, SoftBank, KDDI, J:COM |
| Australia | TPG, Telstra, Aussie Broadband, Optus |
| Indonesia | Telkom Indonesia, Indosat, Telkomsel |

Across the 16 countries all 317 residential exits were in the country set in the username, by ip-api.com and by the Cloudflare trace, on 154 home networks, and ip-api.com reported none of them as a hosting range. On a site with no IPv6 address every request goes over IPv4, whatever the exit, which the next test shows.

IPv4-only sites

## Ten sites with no IPv6 address, loaded through home IPv4.

On 20 November 2026 none of these ten hosts published an IPv6 (AAAA) record, so every request to them goes over IPv4, whatever the exit. We loaded each one 10 times per network through rotating US exits, with the request headers of Chrome on Windows.

IPv4-only sites through rotating US residential exits, 10 loads per site per network, 20 November 2026; median time of the full HTML page

| Page | Residential Basic | Residential Premium |
| --- | --- | --- |
| Reddit, a subreddit | 1.05 s | 1.14 s |
| X home | 1.21 s | 1.27 s |
| Walmart home | 1.71 s | 1.52 s |
| GitHub repository | 1.83 s | 1.96 s |
| PayPal home | 1.33 s | 1.58 s |
| TikTok explore | 1.68 s | 2.08 s |
| Target home | 1.86 s | 1.99 s |
| Craigslist New York | 3.55 s | 3.08 s |
| Indeed home | 1.34 s | 1.53 s |
| Airbnb home | 1.77 s | 1.65 s |
| All ten sites | median 1.69 s | median 1.74 s |

Each time is the median for the full HTML page, with status 200, more than 5 KB of HTML and the real content rather than a verification page, timed from our machine in Italy to a US home exit and back. Sites that need a real browser even without a proxy were not part of this sample.

![Ten IPv4-only sites loaded through home IPv4 exits on 20 November 2026, drawn as a bar chart with a seconds scale and the median page time written on each bar, Residential Basic in blue and Residential Premium in mint: Reddit 1.05 and 1.14 s, X 1.21 and 1.27 s, Walmart 1.71 and 1.52 s, GitHub 1.83 and 1.96 s, PayPal 1.33 and 1.58 s, TikTok 1.68 and 2.08 s, Target 1.86 and 1.99 s, Craigslist 3.55 and 3.08 s, Indeed 1.34 and 1.53 s, Airbnb 1.77 and 1.65 s. Across the ten sites: Premium median 1.74 s, Basic median 1.69 s.](https://quanticdata.io/ipv4-residential-proxies/sites-chart.webp?v=20261120v4r)

*Sites with no IPv6 address are reached over IPv4 only: median page times of ten of them through rotating US residential exits.*

Rotating or sticky

## Home IPv4 addresses in rotation, or a sticky session.

```bash
# Residential Basic, rotating: home IPv4 addresses in rotation, in Germany
curl -x "$BASIC_HOST" -U "USER-type-residential-country-de:PASS" https://api64.ipify.org

# Residential Basic, sticky: one home IPv4 for 30 minutes under the session ID "acct07"
curl -x "$BASIC_STICKY_HOST" -U "USER-type-residential-country-us-session-acct07-lifetime-30:PASS" https://api64.ipify.org

# Residential Premium, sticky: one home IPv4 for 30 minutes
curl -x "$PREMIUM_HOST" -U "USER-country-us-sid-acct07-ttl-30m:PASS" https://api64.ipify.org
```

*cURL: the username carries the country and the session; the dashboard generator writes these lines, host and port included*

Sticky sessions of 30 minutes, 10 requests 12 seconds apart, one session per country, 20 November 2026

| Network | Countries | Result |
| --- | --- | --- |
| Residential Basic | US, UK, Germany, Brazil | One IPv4 address for the whole session in each of the 4 countries |
| Residential Premium | US, UK, Germany, Brazil | One IPv4 address for the whole session in each of the 4 countries, 40 of 40 requests |

Rotating is the default for collecting many independent pages: requests leave from home IPv4 addresses in rotation. A sticky session is for a login, a cart or a short flow, and its length is set in the generator, up to 1,440 minutes. Both modes are the same plan and the same price per GB. When to use each mode is on [sticky vs rotating proxies](https://quanticdata.io/residential-proxies/sticky-vs-rotating/).

Static IPv4 and mobile IPv4

## The other two IPv4 networks that are not hosting addresses.

The same IPv4 checks on a static ISP IP and on the Mobile plan, 20 November 2026

| Network | What we ran | Result | From |
| --- | --- | --- | --- |
| [ISP (static)](https://quanticdata.io/isp-proxies/) | 10 requests to the two dual-stack endpoints through one US ISP IP | The same IPv4 address on 10 of 10, network Verizon Business, not flagged as hosting | $2.50 per IP for 30 days |
| [Mobile](https://quanticdata.io/mobile-proxies/) | 10 rotating requests per country in the same 16 countries | IPv4 carrier exits on networks such as T-Mobile USA, Vodafone, Orange, NTT Docomo and Telstra | $2.30 per GB |

Pick the static ISP line when one account must keep one address for weeks; the residential pools rotate by design, with sticky sessions set for up to 1,440 minutes. Pick Mobile when the target is an app or a site built for phones and a carrier address changes the answer; the carriers by country are listed on the [mobile proxies](https://quanticdata.io/mobile-proxies/) country pages. For collection across many sites and countries, the residential pools above cost the least per GB.

What it costs

## Per GB, paid once, no subscription.

Residential bundles, from the live residential proxies page on 20 November 2026

| Line | Smallest bundle | Largest bundle | Per GB |
| --- | --- | --- | --- |
| Residential Basic | 5 GB for $5, 30 days | 1 TB at $0.80 per GB, 360 days | $1.00 down to $0.80 |
| Residential Premium | 1 GB for $4, 30 days | 500 GB for $1,100, 90 days | $4.00 down to $2.20 |

Basic targets country, state, city and network by ASN, the right line for volume. Premium has its own location and ISP catalogue and pool filters for speed and quality, the line for hard targets and long sessions. Both carry HTTP, HTTPS and SOCKS5 on one login. Every bundle and its price per GB is on [residential pricing per GB](https://quanticdata.io/residential-proxies/volume-pricing/); 100 MB of Basic is free for 5 days with SMS verification and no card, on [the free proxy trial](https://quanticdata.io/proxy-free-trial/).

Before you buy

## Questions buyers ask

### What is an IPv4 residential proxy?

A proxy whose exit is the IPv4 address of a home internet connection, assigned by a consumer internet provider. Websites see a household address in the country you choose. In our test of 20 November 2026 all 317 rotating residential exits were in the country asked, on 154 home networks, none of them a hosting range.

### IPv4 vs residential proxy: what is the difference?

They answer different questions. IPv4 is the protocol version of the address; residential says the address belongs to a home internet provider. A residential proxy is normally IPv4. What sellers call an "IPv4 proxy" is often a datacenter address, which is IPv4 too but owned by a hosting company.

### Are residential proxies IPv4 or IPv6?

Residential Basic and Premium give IPv4 addresses of home internet lines, the version every website accepts. Sites with no IPv6 address, such as the ten in our test, are always reached over IPv4.

### Can I get rotating IPv4 residential proxies?

Yes. A rotating line changes home IPv4 from request to request: our sample of 317 requests came from 154 home networks in 16 countries. The same plan also runs sticky sessions of up to 1,440 minutes, set in the username.

### Are there free IPv4 residential proxies?

The free trial is 100 MB of Residential Basic for 5 days, with SMS verification and no card, enough to check the exits on your own targets. Paid Basic starts with 5 GB for $5, valid 30 days.

### How much do IPv4 residential proxies cost?

Residential Basic costs $1.00 per GB down to $0.80 per GB on 1 TB; Residential Premium costs $4.00 per GB on 1 GB down to $2.20 per GB on 500 GB. Every bundle is paid once, with no subscription and no identity check.

## Home IPv4 addresses in the country you choose.

Residential Basic from $0.80 per GB, Residential Premium from $2.20 per GB, rotating or sticky, HTTP and SOCKS5. Paid once, no subscription, no KYC.

[Buy residential proxies](https://app.quanticdata.io/register?next=%2Fplans%3Fnetwork%3DRESIDENTIAL&utm_source=ipv4-residential-proxies-final&utm_medium=ai-twin&utm_campaign=proxy-types&utm_content=ipv4-residential-proxies-final) · [Free 100 MB trial](https://quanticdata.io/proxy-free-trial/)

Related

## Related pages

- [IPv4 proxies on every network](https://quanticdata.io/ipv4-proxies/)
- [Residential proxies](https://quanticdata.io/residential-proxies/)
- [What is a residential proxy](https://quanticdata.io/what-is-a-residential-proxy/)
- [Static residential proxies](https://quanticdata.io/static-residential-proxies/)
- [IPv6 proxies](https://quanticdata.io/ipv6-proxies/)

---

Source: https://quanticdata.io/ipv4-residential-proxies/ · Site index for AI: https://quanticdata.io/llms.txt
