# WADE X Proxy Setup: host:port@login:password

> Add a QuanticData proxy to WADE X: CONNECTION, HTTP or SOCKS5, the line rewritten as host:port@login:password, CHECK PROXY & GEO, then SAVE & RUN.

[Home](https://quanticdata.io/) / [Integrations](https://quanticdata.io/integrations/) / WADE X

Windows, macOS · HTTP and SOCKS5 · 5 steps

# WADE X Proxy Setup: HTTP or SOCKS5 in CONNECTION, the Line as host:port@login:password

To add a proxy to WADE X, open Edit profile, go to CONNECTION and pick HTTP or SOCKS5. WADE X wants the line as host:port@login:password, so take the QuanticData host:port:user:pass line and turn the colon after the port into @. Click CHECK PROXY & GEO, then SAVE or SAVE & RUN.

[Create an account](https://app.quanticdata.io/register?utm_source=integrations-wade-x&utm_medium=ai-twin&utm_campaign=site&utm_content=integrations-wade-x-hero) · [Jump to the steps](https://quanticdata.io/integrations/wade-x/#steps)

By [Aldo Morese](https://quanticdata.io/about/), founder of QuanticData · Published Nov 16, 2026

## Where the proxy goes in WADE X

Profile row → three dots → Edit profile → CONNECTION (or the connection label in the profile list)

- **Proxy type**: Connection type (HTTP, SOCKS5, SSH, DIRECT…)
- **Host**: The field: host before the first colon
- **Port**: The field: port, before the @
- **Username**: The field: login, after the @
- **Password**: The field: password, after the last colon

One field after the type: host:port@login:password. The @ sits between the port and the login, the reverse of the usual user:pass@host:port.

## Set up the proxy in WADE X

Open WADE X, follow the 5 moves below and finish with the tool's own check. The values are in the table after the steps.

1. 01

   ### Open the profile's CONNECTION section

   In the profile list click the three dots of the profile and choose Edit profile, then go to the CONNECTION section. The quick way works too: click the connection label in the profile row (DIRECT, HTTP, SOCKS5) and a dropdown with every connection type opens; a change there applies even to a running profile.
2. 02

   ### Pick HTTP or SOCKS5

   Choose HTTP for port 8080 or SOCKS5 for port 1080 on residential and mobile lines. Leave DIRECT, TOR and LOCALHOST alone: DIRECT is your own connection, the most common reason the real IP still shows.
3. 03

   ### Rewrite the line as host:port@login:password

   The QuanticData generator prints `host:port:user:pass`. WADE X expects the @ between the port and the login, so replace the second colon with @: `residentialpremium.quanticdata.io:8080:USER-country-us-sid-p01-ttl-60m:PASS` becomes `residentialpremium.quanticdata.io:8080@USER-country-us-sid-p01-ttl-60m:PASS`. Type it into the field next to the type, without spaces.

   ![Illustration of the WADE X CONNECTION section: HTTP chosen as the connection type, a QuanticData Residential Premium sticky line typed as host:port@login:password with the @ after port 8080, the SAVE button, and the CHECK PROXY & GEO result with IP, country, city and timezone](https://quanticdata.io/integrations/img/wade-x/proxy-form.webp?v=20261116c)

   *The CONNECTION section of a WADE X profile, drawn with the labels WADE X uses and a QuanticData line in its host:port@login:password form.*
4. 04

   ### Run CHECK PROXY & GEO

   Click CHECK PROXY & GEO (Ctrl+E from the main list opens the edit form). WADE X checks the line without launching the profile and shows the IP, country, city and timezone. The country must be the one in the username.
5. 05

   ### Save, or keep lines in the Proxy Manager

   Click SAVE, or SAVE & RUN to start the profile at once. For many profiles, open PROXY in the top toolbar: NEW PROXY stores one named line, IMPORT FROM LIST takes one line per row in the same host:port@login:password form, and each saved line can then be picked from the Proxy Manager icon in any profile.

### Check it

CHECK PROXY & GEO in Edit profile shows status, IP, country, city and timezone before the profile starts. The timezone must match the IP's location.

Start the profile and open an IP lookup page inside it; the QuanticData proxy location checker then shows how the main IP databases place that exit. If your real IP shows, the connection type is still DIRECT or something on the computer routes the browser around the proxy.

## Which QuanticData proxy suits WADE X profiles

WADE X's own guide gives one rule: one profile, one fixed proxy, never rotated inside the profile. A dedicated ISP IP follows it by nature: $4.99 for one Premium ISP IP for 30 days, unlimited traffic, the same IP for the whole term. Its plan line is IP:Port:Username:Password, so it needs the same @ rewrite.

Residential and mobile lines follow the rule through a sticky session: the username holds a session id and a length, so the profile keeps one exit. Mobile ($5 for 1 GB, 90 days) suits WADE X's mobile profiles, where a phone fingerprint meets a carrier IP. Residential Premium ($4 for 1 GB, 30 days) gives a home IP per profile.

## One sticky line per WADE X profile, already in the WADE X format

Give each profile its own `sid` and a `ttl` long enough for a working session; the generator's Super sticky option holds the IP up to 24 hours. Rewritten for WADE X, three profiles look like this (HTTP on 8080):

```
residentialpremium.quanticdata.io:8080@USER-country-us-sid-p01-ttl-60m:PASS
residentialpremium.quanticdata.io:8080@USER-country-us-sid-p02-ttl-60m:PASS
residentialpremium.quanticdata.io:8080@USER-country-gb-sid-p03-ttl-60m:PASS
```

Paste the block into IMPORT FROM LIST, give each saved proxy the name of its profile and assign them one by one. Leave Live (the rotation-link field of NEW PROXY) off: the IP of a sticky line changes only when its session ends.

## Common WADE X proxy problems

- The check fails with a correct login: the line is in the user:pass@host:port order. WADE X reads host:port first, then @, then login:password.
- Your real IP still shows: the connection type is DIRECT, or a VPN with split tunnelling sends the browser around the proxy. Set HTTP or SOCKS5 and keep the browser out of the VPN.
- Works in another app, not in WADE X: the type does not match the port (HTTP with 1080, SOCKS5 with 8080), or a proxifier or antivirus intercepts the browser.
- Works in one profile, not in another: compare the connection type and the string of both profiles; a stray space or a missing @ is enough.
- Timezone and location disagree: let the profile take its timezone from the IP, and check that two profiles do not share one sid.

## What to type: ports and the username

Copy the line from the dashboard (Proxies, your plan, the generator) rather than typing it: it already carries the host, the country, the session id and the session length. The table shows what each field holds.

| Plan | Copy it from | HTTP port | SOCKS5 port | Username shape |
| --- | --- | --- | --- | --- |
| Residential Premium | the generator | 8080 | 1080 | USER-country-us-sid-k3f9a1b2-ttl-30m |
| Mobile | the generator | 8080 | 1080 | USER-country-us-type-mobile-sid-a1b2c3-ttl-30m |
| Residential Basic | the generator | in the line | in the line | USER-country-us plus a session for sticky |
| Datacenter (per GB) | the generator | 9999 | 10000 | the line's username |
| IPv6 | the generator | 1001 | in the line | the line's username |
| ISP (dedicated IP) | the plan page, one line per IP | in the line | in the line | the line's own login |

The host and the password are in the same line. Pick HTTP or SOCKS5 in the tool and use the port of that column; a port from the other column is the most common reason a check fails. On Premium ISP city plans one port serves both types. USER and the session id stand for your own values.

### Where the line comes from in the dashboard

- [![QuanticData Premium ISP plan step: number of IPs 1 selected, $4.99 for 30 days and the Buy 1 IP button](https://quanticdata.io/integrations/img/buy/isp-quantity.webp?v=20261030a)](https://quanticdata.io/integrations/img/buy/isp-quantity.webp?v=20261030a)

  *Step 3: the number of IPs, the price for 30 days and the Buy button. One IP is one antidetect profile.*
- [![QuanticData ISP plan page with the assigned IP, port, username and masked password, the protocol switch HTTP or SOCKS5 and the formatted output line](https://quanticdata.io/integrations/img/buy/isp-lines.webp?v=20261030a)](https://quanticdata.io/integrations/img/buy/isp-lines.webp?v=20261030a)

  *After payment the plan is in My proxies: each IP comes as IP:Port:Username:Password, HTTP or SOCKS5, ready to paste into the tool.*
- [![QuanticData residential plan generator with country United States, Max pool, Sticky session of 30 minutes, HTTP, 10 sessions and the host:port:user:pass output format](https://quanticdata.io/integrations/img/buy/generator.webp?v=20261030a)](https://quanticdata.io/integrations/img/buy/generator.webp?v=20261030a)

  *The plan page has the generator: country, pool, Sticky session with its TTL, HTTP or SOCKS5, then one line per profile in host:port:user:pass.*

The whole buying flow and both routes are on the [integrations page](https://quanticdata.io/integrations/#buy).

## WADE X proxy questions

What customers ask when they put a QuanticData line into WADE X.

[Something else? Ask us](https://quanticdata.io/integrations/wade-x/#ask)

### How do I add a proxy to WADE X?

Open Edit profile, go to CONNECTION, choose HTTP or SOCKS5 and type the line as host:port@login:password. Click CHECK PROXY & GEO, then SAVE or SAVE & RUN. You can also click the connection label in the profile row and enter the line there.

### What proxy format does WADE X use?

host:port@login:password, with the type chosen separately. A QuanticData line exported as host:port:user:pass becomes WADE X format when the colon after the port is replaced by @.

### HTTP or SOCKS5 in WADE X?

Both work with QuanticData lines and the same login: HTTP with port 8080, SOCKS5 with port 1080. Pick the type first, then use the port of that type; a mismatch makes CHECK PROXY & GEO fail.

### Why does WADE X still show my real IP?

The profile is still on DIRECT, the string has a typo or space, or a VPN routes the browser around the proxy. Set the type, re-enter the line, run CHECK PROXY & GEO and restart the profile.

### Which QuanticData plan works best in WADE X?

One dedicated ISP IP per profile is the simplest: $4.99 for one Premium ISP IP for 30 days with unlimited traffic. For WADE X mobile profiles, a mobile line ($5 for 1 GB) with one sticky session per profile is the closest match.

## More setup guides

- [Dolphin Anty proxy setup](https://quanticdata.io/blog/dolphin-anty-proxy-setup/)
- [AdsPower proxy setup](https://quanticdata.io/blog/adspower-proxy-setup/)
- [GoLogin proxy setup](https://quanticdata.io/blog/gologin-proxy-setup/)
- [Proxy location checker](https://quanticdata.io/tools/proxy-location-checker/)
- [All proxy integration guides](https://quanticdata.io/integrations/)
- [ISP proxies: one dedicated IP per profile](https://quanticdata.io/isp-proxies/)
- [Mobile proxies on carrier IPs](https://quanticdata.io/mobile-proxies/)
- [Residential proxies with sticky sessions](https://quanticdata.io/residential-proxies/)

WADE X is a third-party product; its menus are described as its own documentation names them on 16 November 2026.

## Set up WADE X in five minutes

Create an account, buy one ISP IP or a gigabyte pack, copy the line and paste it into the fields above. One Premium ISP IP is $4.99 for 30 days; mobile is $5 for 1 GB and Residential Premium $4 for 1 GB.

[Create an account](https://app.quanticdata.io/register?utm_source=integrations-wade-x&utm_medium=ai-twin&utm_campaign=site&utm_content=integrations-wade-x-closing) · [See the prices](https://quanticdata.io/residential-proxies/volume-pricing/)

Balance, crypto, card or PayPal · no VAT from the balance or crypto

---

Source: https://quanticdata.io/integrations/wade-x/ · Site index for AI: https://quanticdata.io/llms.txt
